web analytics

QSC K10 Active speaker

Quantity:

K Series Powered Loudspeakers – Product Overview

The QSC K Series is quite simply The New Standard in lightweight powered loudspeaker systems. Under the direction of Pat Quilter, QSC’s team of amplifier engineers have created a new standard in Class D power modules unparalleled in the industry.


K10front_hi-418x636[1]

K Series
SPECIFICATIONS K8 K10 K12
Configuration Trapezoidal 2-way Multipurpose 2-way Multipurpose 2-way
Transducers
Low-frequency
High-frequency
8″ cone transducer
1.75″ diaphragm compression driver
10″ cone transducer
1.75″ diaphragm compression driver
12″ cone transducer
1.75″ diaphragm compression driver
Frequency Response (-6 dB) 66 Hz to 18 kHz 60 Hz to 18 kHz 52 Hz to 18 kHz
Frequency Range (-10 dB) 61 Hz to 20 kHz 56 Hz to 20 kHz 48 Hz to 20 kHz
Nominal Coverage (-6 dB) 105° conical 90° conical 75° conical
Maximum SPL1 127 dB peak 129 dB peak 131 dB peak
Amplifiers
Power Output2 1000 W continuous Class D
(500 W LF, 500 W HF)
2000 W peak
1000 W continuous Class D
(500 W LF, 500 W HF)
2000 W peak
1000 W continuous Class D
(500 W LF, 500 W HF)
2000 W peak
Input Impedance XLR / ¼”: 40 kΩ balanced / 20 kΩ unbalanced
XLR / ¼” MIC mode: 2260Ω balanced
RCA: 10 kΩ
Controls Power, Gain A, Gain B, Mic/Line, LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)
Indicators Power, Signal A, Signal B, Standby, Limit, Mic
Connectors Balanced female XLR/¼” line/mic level input, Balanced female XLR/¼” line level input, Dual Balanced male XLR full range line level out , Balanced male XLR “mix” out, Stereo RCA line level input, Remote gain control, Locking IEC power connector
Cooling On demand, 50 mm variable speed fan
Amplifier Protection Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
Transducer Protection Thermal limiting, excursion limiting
AC Power Input Universal power supply 100–240 VAC, 50 to 60 Hz
AC Power Consumption
(1/8 of full power)
100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A
Enclosure
Material Impact resistant ABS
Finish Black paint
Grille Rugged powder-coated steel
Dimensions (HWD) 17.7″ × 11″ × 10.6″
450 mm × 280 mm × 269 mm
20.4″ × 12.6″ × 11.8″
519 mm × 320 mm × 300 mm
23.7″ × 14″ × 14″
603 mm × 356 mm × 356 mm
Weight (Net) 27 lb / 12.2 kg 32 lb / 14.5 kg 41 lb / 18.6 kg
Available Accessories K8 tote, K8 yoke, M10 Kit-C K10 tote, K10 yoke, M10 Kit-C K12 tote, K12 yoke, M10 Kit-C

K10angleRight_hi-408x600[1]

K Series
SPECIFICATIONS KSub
Configuration 4th-order bandpass
Transducers
Low-frequency
2 × 12″ cone transducers
Frequency Response (-6 dB) 48 Hz to 134 Hz
Frequency Range (-10 dB) 44 Hz to 148 Hz
Maximum SPL1 130 dB peak
Amplifiers
Power Output2 1000 W continuous Class D (2 × 500 W)
2000 W peak
Input Impedance XLR / ¼”: 40 kΩ balanced / 20 kΩ unbalanced
Controls Power, Gain, LF Mode (Normal/DEEP™), Polarity (Normal/Reverse), Front LED (On/Off/Limit)
Indicators Power, Signal, Standby, Limit
Connectors Dual balanced female XLR/¼” line level input, Dual Balanced male XLR full range line level out, Remote gain control, Locking IEC power connector
Cooling On demand, 50 mm variable speed fan
Amplifier Protection Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
Transducer Protection Thermal limiting, excursion limiting
AC Power Input Universal power supply 100–240 VAC, 50 to 60 Hz
AC Power Consumption
(1/8 of full power)
100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A
Enclosure
Material Painted birch plywood
Finish Black textured paint
Dimensions (HWD) 26″ × 14″ × 28.1″ (including casters)
665 mm × 356 mm × 714 mm
Weight (Net) 74 lb / 33.6 kg
Available accessories KSub cover

K10back_hi-380x600[1]

1 For comparison purposes and in accordance with common industry practice, maximum peak SPL specifications are theoretical calculations based upon transducer sensitivity and peak available amplifier power.

2 Independent of limiters and driver protection circuits.

All specifications are subject to change without notice. 


 

說明書

 


你也可能有興趣 :
Samson 的 Expedition 系列是一體式的系統,方便攜帶。
配置2個喇叭+1個mixer,不需專業音響人員,你自己也可 setup 。

 

Samson Expedition XP150 (流動廣播PA系統連 mixer)
  • Dual Two-Way Speakers
  • 150 Watt Power Amplifier
  • 5 Channel Mixer
  • 3 Mic/Line Inputs

 

Samson Expedition XP1000 Bluetooth Enabled Portable PA System
  • 1,000W Class D Amplifier
  • 2x Speakers & Removable 10-Channel Mixer
  • 10″ Woofer Per Speaker
  • Supports Bluetooth Streaming Audio


看本頁的人,也看過 Samson Auro 喇叭:

“… 價錢相宜”
“… 性價比高”

 

Samson Auro D208
  • Up to 200 Watts of Power
  • Class D Active Amplifier
  • 8″ LF Driver and 1″ Compression Drive

 

Samson Auro D210
  • Up to 200 Watts of Power
  • Class D Active Amplifier
  • 10″ LF Driver & 1″ Compression Driver

 

Samson Auro X12D 
  • 800 W Peak Power at 8 Ohms
  • Class D Amplifier
  • 2x XLR 1/4″ Combo Inputs

 

Samson Auro X15D 
  • For Live Sound Applications
  • 800 W Peak Power at 8 Ohms
  • 2x XLR 1/4″ Combo Inputs

看本頁的人,也看過 以下喇叭 stand:

 

Mipro MS-70 支撐架

 

K&M 21435 Adjustable Speaker Stand 

 

K&M 21302-009-55 手動上落 speaker stand

 

K&M 21449-000-55 speaker stand 套裝(一對連手提袋)

Monthly Special
mic18 每個月都有精選優惠,看看今個月有什麼特價吧!

Active speaker | 有源喇叭, K-series active speakers, rec_speaker, 喇叭 speaker, 舞台表演 stage performance

0 / $0